Tophammer Shank Adapters
Shank adapters used for Sandvik / Atlas Copco / Furukawa / Montabert / Boart / Ingersoll-Rand / SIG / Gardner-Denver top hammer drifters etc…
Material: 23CrNi3Mo
Heat Treatment: Fully Carburization, Air Cool Quenching, Tempering
For ATLAS COPCO
| ATLAS COPCO SHANK ADAPTORS
BBC 43, 44, 45, 100 BBC 51, 52, 54, 120 BBE 56U2, 57, 5701 COP 1028 MALE & FEMALE COP 1032 MALE & FEMALE COP 1036, 1038, 1238 COP 1132 MALE & FEMALE COP 1240, 1640 COP 1240 EX, 1640 EX COP 1338 MEX / EX COP 1432, 1440, 1532, 1550, 1638, 1838, 2238 COP 1432, 1532 FEMALE COP 1440, 1550, 1838 COP 1550 EX, 1838 EX / MEX COP 1840, 1850 COP 1840 EX, 1850 EX, 2150 EX, 2540 EX, 2550 EX COP 2150 EX, 2550 EX COP 2160, 2560 COP 2160 EX, 2560 EX COP 4050 (L) COP 4050 EX COP 4050 MUX |
For SANDVIK (TAMROCK)
| SANDVIK TAMROCK SHANK ADAPTERS
HL 300 HL 300 S FEMALE HL 500-38, 510-38 HL 500-45, 510-45 HL 500 S-38, 510 S-38, 510 B, 510 LH HL 550 SUPER M92, 560 SUPER HL 510 S-45 HL 600-45 HL 600-52 HL 645 HL 650-45, 700-45, 700 T-45, 710-45, 800 T-45 HL 650-52, 700-52, 700PE-52, 700S-52 710-52, 710 PE-52, 710 S-52 710SPE-52, HL 800T-52, 800PE-52 HL 844 HL 850 S HL 1000-52, 1000 S-52 HL 1000-60 HL 1000 PE-52 HL 1000 PE-65, HL 1500 PE-65 HL 1560 T-65 HL 1500-60, HL 1500 T-60 HL 1500 T-80 HLR 438 L, HLR 438 T HLR 438 LS, 438 TS, HL 538, HL 538 L, L 550 S HLX 1 HLX 5, HLX 5 T HLX 5 PE-45 L400, L410, L500, L510, L550 |
For MONTABERT
| MONTABERT ROCK DRILL SHANK ADAPTORS
H 40, 50, 60, 70 (Leyner) H 100 HC 20 FEMALE HC 25 FEMALE HC 40, HC 50 HC 40, HC 50 FEMALE HC 80 HC 90, HC 105 HC 109, HC 110, HC 120 HC 150 HC 80 RP, HC 105 RP, HC 107 RP, HC 108 RP, HC 109 RP, HC 110 RP HC 120RP, HC 150 RP, HC 155 RP, HC 158 RP HC 160, HC 170 HC 200 A HC 200 R |
For FURUKAWA
| HD 200, M 120 HD 260 HD 300 HD 500 HD 609 HD 609 QED HD 612 HD 612 QED HD 615 HD 615 QED HD 709 HD 709 QED HD 712 HD 712 QED HD 715 HD 715 QED PD 200 |
For INGERSOLL-RAND
| EVL 130, VL 140 HYDRASTAR 200 URD 475A, 550, VL 120, VL 140, F16 YD 90 M YH 60 YH 65, YH 70, YH 80 YH 65 RP, YH 70 RP, YH 80 RP YH 80 A YH 80 ARP YH 95, YH 100 YH 95 PR, YH 100 RP YH 110 V YH 110 VRP, YH 135 R |
HEXAGONAL SHANK ADAPTERS
| For hexagonal bushing 22*108mm, R22 threaded with length 120mm, 180mm, 200mm, 291mm, 360mm, 460m, 500mm etc.
For hexagonal bushing 25*108mm, R25 threaded with length 255mm, 600mm, 800mm, 1000mm etc. For hexagonal bushing 25*159mm, R25 threaded with length 1200mm, 1830mm, 4200mm, 4700mm etc. |
Download The Catalogue